板紙, 複合材の型抜き加工に関する研究
Fundamental Mechanics on Paperboard Diecutting
くさび切刃と面板との組合せで行われる、塗工紙などの板紙の抜き型加工は、
牛乳パックや菓子箱等の量産工程で広く使われている。またシール材や フィルム等の抜き加工にも使われる汎用的な加工法である。
このような板紙の打ち抜き加工における刃先摩耗や切れ味特性を知ることは、 工具寿命の予測や生産管理の観点から重要である。
そこで、切れ味特性の調査ならびに工具摩耗特性を実験的に進めるとともに 紙材の基本的な性質を調査し、基礎的な力学特性を追究する。
また、段ボール箱を代表例とする包装箱の強度評価についても、実験ならびに
計算を進めており、予測評価式の確立ならびに諸データの収集を行っている。
Paperboard diecutting, which is constituted with
a center bevel blade and a counter plate, is widely used for
producing various packages, printing cards, thermal insulation
films and labels. They are used for food packages and liquid
containers and so on. This cutting method has several merits for
processing a large-sized sheet under a high speed transferring,
and also has a high precision sizing with a complicated pattern.
An important merit of this cutting method is relatively economical
with respect to its maintainability. However, this cutting method
(mechanics) has some demerits or technical problems to be solved.
The sharpness of diecutter and the endurance of cutting tools are
always important and interesting from the aspects of industrial
engineering. And at the same time, the material properties of
worksheet, which is usually laminated with adhesives and glues
and/or coated by some colored clays, are important for performing
a high quality of sheared profile. Bending of crease and cutting
(shearing and stripping) are primary topics. To reduce any dusts
is another topic. Mechanical behavior of coated layer on the
worksheet and coating technology of tool surface are also included
to those topics.
Through various experiments, we observe real behaviors which
occurr at a cutting/bending process by using a high performance
microscope and measure the load response during the process. And
also, we investigate the deformation behavior of the worksheet
through an FEM simulation. Cracking phenomena during a half
breaking stage, frictional slipping between the worksheet and the
tool are discussed.
公表論文等の例 (Examples of published technical papers)
- Songtam Laouswan, Shigeru Nagasawa, Development of compressive testing device for
glass fiber based single face corrugated structure sheet, and
estimation of buckling strength of straight panel of that
structure sheet, AIMS Materials Science,
Vol.8 No.6, (December 14th, 2021), [881-898], DOI:
https://doi.org/10.3934/matersci.2021054.
- Shigeo Yanabe, Shigeru Nagasawa, Distribution
and change of stresses, slippage, tension, and friction forces
in wound rolls (Simulation of center winding without
nip)
[巻き取り中のロールの応力,すべり,張力,摩擦力の分布と変化(中心駆動巻き取りシミュレーション)], Transactions
of the JSME (in Japanese), Vol.87, No.904
(2021.Dec.25.), Artcle ID: 21-00322 [1-19], Advance publication
(2021,December 06), DOI: https://doi.org/10.1299/transjsme.21-00322
- Shigeru Nagasawa, Kouhei Ishii, Itaru Kobayashi, Effects of processing conditions on tearing
characteristics of zipper lines of E-flute corrugated
paperboard (dependency of length of connecting portions, width
of zipper band, phase shift of dashed lines and tearing
velocity on tearing characteristics), Journal of
packaging science & technology, Japan, Vol.30
No.6, (2021, December 1), [405-414]. http://www.spstj.jp/publication/magazin/bk30.html
- Shigeru Nagasawa, Takaomi Nagumo, Azusa Sakamoto, Kazuki
Umemoto, Relaxation Characteristics of Creasing Process of
Scored Paperboard for Liquid Container, In book: Forming the
Future (by Springer), (2021, July 11), [1643-1653], DOI:10.1007/978-3-030-75381-8_138
- Shigeru Nagasawa, Masahiro Uehara, Chiharu Matsumoto,
Effects of mechanical conditions on
tearing characteristics of zipper band made of
white-clay-coated paperboard (Dependency of tearing
characteristics on length of connecting portions, width of
band and pulling direction), Journal of Advanced
Mechanical Design, Systems, and Manufacturing,
Vol.15 Issue 1, (2021, February 17th), Paper ID:20-00448 [1-10],
DOI: https://doi.org/10.1299/jamdsm.2021jamdsm0009
- Shigeo Yanabe, Shigeru Nagasawa, Simulation
of winding web on surface winder (Stress distribution, tension
and slippage of wound roll), Transactions of the
JSME (in Japanese), Vol.86 No.891 (2020, November
25), (2020 October 13) [1-16]. DOI:
https://doi.org/10.1299/transjsme.20-00219
- Thepwachara RUCHIRABHA, Shigeru NAGASAWA, Effect of anvil profile on cutting
characteristics of polystyrene bar subjected to wedge
indentation, Journal of Advanced Mechanical
Design, Systems, and Manufacturing, Vol.14, Issue 6,
(2020, September 21), Paper ID:20-00244, [1-22]. DOI: https://doi.org/10.1299/jamdsm.2020jamdsm0093
- Shigeru Nagasawa, Research
Prospect of Sheet Processing for Making Boxes from Aspects of
Cutting and Folding Mechanics, Journal of
Society of Packaging Science and Technology, Japan,
Vol. 29, No.4 (2020, August, 1)[257-265]. http://www.spstj.jp/publication/magazin/bk29.html
- Nguyen Cong Hanh, Shigeru Nagasawa, Experimental and Numerical Investigation of
Cutting Characteristics of PA6/PE Nylon Film Subjected to
Wedge Indentation Process, Materials Science
Forum (Material Engineering and Manufacturing
III), Vol.1009, (August 28th, 2020), [129-134].
(Trans Tech Publication) DOI: https://doi.org/10.4028/www.scientific.net/MSF.1009.129
- Nguyen Cong Hanh, Shigeru Nagasawa, Kensei Kaneko, Strength estimation of silicon nitride
ceramics using a round-notched specimen subjected to
shearing-tool indentation, AIMS Materials Science,
(2020, August 20), Vol.7 issue 5: [518–533]. DOI: https://doi.org/10.3934/matersci.2020.5.518
- Nguyen Cong Hanh, Shigeru Nagasawa, Cutting characteristics of nylon- polyethylene
laminated film subjected to wedge indentation and its thermal
dependency, Journal of Advances in Materials and
Processing Technologies (Taylor & Francis Online),
Vol.6, (2020, August 5), [1-12], DOI: https://doi.org/10.1080/2374068X.2020.1802555.
- Shigeru Nagasawa, Tetsuya Yamamoto, Kazuki Umemoto,
Akira Hine, Daishiro Yamaguchi, Estimation
of bending characteristics of creased paperboard using 45D
tapered groove against unbalanced punch indentation, Journal
of Advanced Mechanical Design, Systems, and Manufacturing,
Vol.14 No.6, (2020, July 21), Paper No.20-00067, [1-11], DOI: https://doi.org/10.1299/jamdsm.2020jamdsm0083
- Thepwachara RUCHIRABHA, Shigeru NAGASAWA, Effect of
Wedge Tip Thickness of Nail Clipper on Cutting Characteristics
of Polystyrene Ribbon, IOP Conference Series:
Materials Science and Engineering , Vol..859:
012008, (May 1st, 2020), [41-49], IOP publishing, DOI: https://doi.org/10.1088/1757-899X/859/1/012008
- Songtam Laosuwan, Shigeru Nagasawa and Kazuki Umemoto,
Development of tensile fixture with
corrugated structure sheet and estimation of tensile strength
of glass fibre fabrics based single face corrugated structure
sheet, AIMS Materials Science, (2020,
Feburary, 25), Vol.7 issue 1: [75-92]. DOI:
https://doi.org/10.3934/matersci.2020.1.75.
- Masami KOJIMA, Shigeru NAGASAWA, Yuichi IGARASHI,
Cutting Characteristics of Silicone Rubber Sheet with Respect to
Indentation Velocity of Keen Wedge Blade, SOSEI-TO-KAKOU
(Journal of the JSTP), Vol.61 No.708 (2020, January 25), [1-6].
DOI: https://doi.org/10.9773/sosei.61.1.
- Satoshi Kaneko, Shigeru Nagasawa, Wedge indentation characteristics of
pressure-sensitive adhesives sandwiched by polyethylene
terephthalate films, Journal of Advanced
Mchanical Design, Systems, and Manufacturing,
Vol.14, Issue 1 (2020, Jan 22), Paper No. 19-00308, Pages
JAMDSM0007 [1-18], DOI: https://doi.org/10.1299/jamdsm.2020jamdsm0007.
- Shigeru Nagasawa, Akihiro Yamamoto, Thepwachara
Ruchirabha and Kazuki Umemoto, Effects of
blade tip profile on in-plane tensile properties of
wedge-notched polypropylene sheet, Int. Journal
of Automation Technology, Vol.13 No.6 (2019,
November 5), [780-786], doi: https://doi.org/10.20965/ijat.2019.p0780.
- Thepwachara RUCHIRABHA, Shigeru NAGASAWA, Development of Measurement System of Cutting
LoadResponse in Nipper Blade, and Estimation of Wedge Angle
Effect on Cutting Characteristicsand Shear Edge Trace of
Polystyrene Bars, AIMS Materials Science,
Vol.6 Issue.2 (2019, March 11), [139-164]. DOI: https://doi.org/10.3934/matersci.2019.2.139.
- Satoshi Kaneko, Shigeru Nagasawa, Estimation of viscoelastic resistance and
subduction profile of acrylic based pressure sensitive
adhesive sheet subjected to wedge indentation, Journal
of Advanced Mechanical Design, Systems, and Manufacturing,Vol.13
Issue 1, (2019), Article ID:18-00336 [1-17], https://doi.org/10.1299/jamdsm.2019jamdsm0019.
- Shigeru Nagasawa, Satoshi Kaneko, Dai Adachi, Effects of rotational velocity and hold time
at folding posture on time-dependent release behavior of
creased white-coated paperboard, Journal of
Advanced Mechanical Design, Systems, and Manufacturing,
Vol.13 Issue 1, (2019), Article ID:18-00230 [1-10], DOI: https://doi.org/10.1299/jamdsm.2019jamdsm0004.
- Satoshi Kaneko, Shigeru Nagasawa, Effect of wedge blade direction on cutting
characteristics of anisotropic polyethylene terephthalate film
(くさび押抜きにおけるポリエチレンテレフタレートフィルムの切断特性に及ぼす異方性の影響), Transactions
of the JSME (in Japanese), Vol.84 No.866 (2018,
October 25; early released at September 14), Article ID:
18-00223, pp.1-15, DOI: https://doi.org/10.1299/transjsme.18-00223
.
- Satoshi Kaneko, Shigeru Nagasawa, PETフィルムの切断面形状に及ぼす切断方向の影響, JSME
Materials and Processing Divison General
Award (New technology and development), (2018,
September 10).
- Pusit Mitsomwang, Rattana Borrisuttekul, Usanee
Kitkamthorn, Shigeru Nagasawa, Investigation
of Strain Hardening in Aluminum Alloy Sheared Sheet Based on
Microhardness Measurement and FEM Analysis, Int.
J. Automation Technol., Vol.12, No.5, (2018,
September 5th), [714-722]. DOI: https://doi.org/10.20965/ijat.2018.p0714.
- Weerayut Jina, Shigeru Nagasawa, Finite
Element Analysis of Folding Process of Creased White-coated
Paperboard using Combination Model of Fluffing Resistance and
Shear Yield Glue, Journal of Advanced Mechanical
Design, Systems, and Manufacturing, Vol. 12
Issue.2, (2018, June 26),Article ID: 17-00708 [1-15], DOI: https://doi.org/10.1299/jamdsm.2018jamdsm0063
.
- Shigeru Nagasawa, New lecture note for packaging: Pushing
process using steel rule and punch (Die-cutting, Form-cutting) ,
Journal of Packaging Science and Technology, Japan,
Vol.27 No.3, (2018, June 1st) [166-175]. http://www.spstj.jp/english/publication/magazin/index.html
- Haruya Yokoyama, Shigeru Nagasawa, Folding Characteristics of Multiple-Scored
Portion of Corrugated Fiberboard, Transactions
on GIGAKU, Volume 5, No.1, Paper ID: 05003-1-7
(2018, April). http://lib.nagaokaut.ac.jp/gigaku-press/wp-content/uploads2018/04/TGVol5-1.pdf
- Shigeo YANABE, Shigeru NAGASAWA and Satoshi KANEKO, Simulation of wavy wrinkling of web caused by
roller tilt (Change of the number of wrinkles and causes of
the onset of the wrinkling),
ローラの傾きによって生じるウェブの波しわシミュレーション (傾き角によるしわ数の変化および歪分布や位置の不整としわ発生の関連),
Transactions of the JSME (in Japanese), Vol.84
No.859 (2018, March 25), Article ID: 17-00473, pp.1-18, DOI:
https://doi.org/10.1299/transjsme.17-00473
- Shigeru Nagasawa, Masahiro Uehara, Chiharu Matsumoto,
Effects of Guiding Routes and Grain
Direction of White-clay-coated Paperboard on Tearing
Characteristics of Zipper Pull Tab, SOSEI-TO-KAKOU,
Vol.59 No.684 (February 25, 2018), [15-20], DOI: https://doi.org/10.9773/sosei.59.15
- Shigeru Nagasawa, Haruki Kudo, Laosuwan Songtam,
Norfariza Wahab and Syotaro Takeda, Tensile
characteristics of glass fiber based single face board,
Procedia Engineering, 207 (2017) [78–83], https://doi.org/10.1016/j.proeng.2017.10.738
.
- Shigeru Nagasawa, Takuya Oyake, Takashi Kajizuka, String-Like Fiber Dust Occurrence in Crush
Cutting of Stacked Liner Boards, In book: Frontiers
in Materials Processing, Applications, Research and
Technology, (January, 2018), [1-15], DOI:
http://dx.doi.org/10.1007/978-981-10-4819-7_1
- Shigeru Nagasawa, Shearing mechanism of paper/composite plate
and diagnosis technology of shearing state, Press working,
Vol.55 No.12, [39-43] (November 1st, 2017), Nikkankogyo
Newspaper Pub. https://www.fujisan.co.jp/product/2367
- Shigeru Nagasawa, Masahiro Uehara, Chiharu Matsumoto,
Haruya Kambe, Weerayut Jina, Estimation
of Stress and Displacement Around Nick Zone of Zipper Pull Tab
Formed on Paperboard, Proceedings of the JSME
2017 International Conference on Materials and Processing,
Article ID: ICMP2017-4303 [1-6], (June 4-8, 2017), Los Angeles,
CA, USA, https://asme.pinetec.com/msec2017-icmp2017/ICMP2017/data/pdfs/trk-1/ICMP2017-4303.pdf
- Weerayut JINA, Shigeru NAGASAWA and Seksan CHAIJIT, Estimation of detaching resistance of a peeled
in-plane layer of a white-coated paperboard using fluffing
resistance and an isotropic elasticity model, Journal
of Advanced Mechanical Design, Systems, and Manufacturing,
Vol.11 No.2 (2017, May 18), Article ID: 16-00659 [1-12]. DOI: http://dx.doi.org/10.1299/jamdsm.2017jamdsm0018
.
- Akihiko Yamamoto, Satawat Singprayoon, Shigeru Nagasawa, S.
Chaijit, Bending behavior of
polypropylene sheet subjected to two-line wedge indentation,
Transactions on GIGAKU, Vol.4 No.1 (2017. May,
12), Article ID: 04003 [1-9]. http://lib.nagaokaut.ac.jp/gigaku-press/wp-content/uploads/2017/05/TGVol4.pdf
- Hanh Cong Nguyen, Shigeru Nagasawa, Kensei Kaneko, Optimizing
boundary surface of ceramics die in deep drawing process, Transactions
on GIGAKU, Vol.4 No.1 (2017.May,12), Article ID:
04002 [1-7]. http://lib.nagaokaut.ac.jp/gigaku-press/wp-content/uploads/2017/05/TGVol4.pdf
- Shigeru Nagasawa, Engineering
estimation of time-dependent deformation characteristics as
bending moment relaxation and released unfolding motion of
creased paperboard, IOP Conference Series:
Materials Science and Engineering, Volume
175,conference 1 (2017), 012003.
DOI:10.1088/1757-899X/175/1/012003 , http://iopscience.iop.org/1757-899X/175/1/012003
- Shigeru Nagasawa, Dai Adachi, Natsuki Sasada, Effect of Holding Time on Time-Dependent
Release Behavior of Creased White-Cotaed Paperboard and
Analysis of Nonlinear Relaxation Characteristcs, SOSEI-TO-KAKOU,
Vol.58 No.673 (February 25, 2017), [151-155], DOI: https://doi.org/10.9773/sosei.58.151
-
Masami Kojima,
Pusit Mitsomwang,
Shigeru Nagasawa.
Effect of cutter tip
angle on cutting characteristics of acrylic worksheet
subjected to punch/die shearing.
AIMS Materials
Science, Vol.3 No.4 (2016, December
5th), [1728-1747]. DOI:
http://dx.doi.org/10.3934/matersci.2016.4.1728
- Pusit Mitsomwang, Pirapa Natpukkana, Rattana
Borrisutthekul, Shigeru Nagasawa, Effects
of Blade Tip Geometry on Cutting Characteristics of Lead Alloy
Sheet Subjected to Wedge Indentation, Key
Engineering Materials, Vol.719 (2016,
November 10th), [137-141], DOI: 10.4028/www.scientific.net/KEM.719.137.
-
-
-
ShigeoYANABE, Shigeru NAGASAWA: Effects of
nip roller on wound roll stress distribution and friction
forces (Simulation of winding process considering web wrapping
around nip roller) [ニップローラがロールの応力分布や摩擦力に及ぼす影響
(ニップローラへの巻き付き角を考慮した2 次元巻き取りシミュレーション)],
Transactions of
the JSME (in Japanese), Vol.
82, No.834
(2016), Artcle ID: 15-00624 [1-15], Advance publication (2016,
January 20), DOI:
click to
open the J-Stage web.
- S.Nagasawa, Y.Fukuzawa, M.Murayama, S.Suzuki: Mechanics and Technology of
Form Cutting for for Paperboard-like Materials
Processing (板紙類の押抜き加工), 太陽書房, (2016.1), ISBN
978-4-86420-155-1.
- Pusit Mitsomwang, Shigeru Nagasawa, Effects
of shearing parameters on cutting characteristics of
polycarbonate sheet subjected to straight punch/die shearing,
Journal of Materials Processing Tecnology,
(Advanced publication: January 17, 2015), PROTEC14248.
- Shigeru NAGASAWA, Shinya OZAWA, Yasushi FUKUZAWA Effects of
folding numbers, scoring depth and bending velocity on
bending-moment relaxation of creased paperboard, Mechanical
Engineering Journal, Vol.2 No.1 , (February
15, 2015), Article ID: 14-00346, [1-9], [Advance
Publication] Released December 25, 2014 .
- 矢鍋重夫,永澤 茂,Pusit MITSOMWANG, 巻き取り過程に
おけるウェブの横ずれとロール側面形状のシミュレーション(層ずれ,湾弧,テレスコープの発生過程), Lateral shift
of web and edge shape of roll in winding process simulated by
FEM (Development of web lateral shift, roll curved edge, and
telescoping), Transactions of the JSME (in
Japanese), Vol.80, No.819 (2014, November 25), Article
ID: 14-00430, [1-15].
- Pusit Mitsomwang, Shigeru Nagasawa, Effect
of mechanical conditions on cutting characteristics of
polycarbonate sheet subjected to straight punch/die shearing,
Procedia Engineering, Vol.81 (2014, October,
10th), [1145–1150], PROENG14461.
-
Pusit Mitsomwang, Shigeru Nagasawa,
Effect of Overlapped Clearance on Out-of-plane Cutting
Characteristics of White-Coated Paperboard Subjected to
Straight Punch/Die Shearing,
Transactions
on GIGAKU, Vol.2
No.1, (2014, October 22), Article ID: 02003, [1-8].
-
- P.Mitsomwang and S.Nagasawa, Cutting
characteristics of white-coated paperboard subjected to
straight punch/die shearing under overlapped clearance,
Journal
of Advanced Mechanical Design, Systems, and Manufacturing,
Vol.8 No.5, Article ID: 13-00333, [1-11], (August 4th,
2014), DOI
-
-
S. Nagasawa,
Y.Shiga, and
Y.Fukuzawa,
Effects of scoring depth, tracking angle,
rubbering on bending-moment relaxation of creased
paperboard,
Advanced Materials Research
(Advances in Materials and Processing Technologies XVI), Vol.
939
(2014,April), Trans Tech Publications, Switzerland, [53-59].
-
S. Nagasawa, P. Mitsomwang, S.
Chaijit, W. Wongpatsa, Finite Element
Analysis of Two Dimensional Deformation of Double-wall
Corrugated Board on Creasing Process, Proceedings
of 3rd International Symposium on Engineering, Energy and
Environment (ISEEE2013), (November 17-20, 2013),
Bangkok, Thailand, [338-343]. ISBN 978-974-466-715-1.
- P. Mitsomwang and S. Nagasawa, Cutting
Behavior of Acrylic Thick Sheet Subjected to Squared Punch
Shearing, Journal
of Chemistry and Chemical Engineering, Vol.7
No.7 (2013, July 25), [653-665].
- S. Nagasawa, K. Ishibashi, Y. Fukuzawa, Effect of Pre-Creasing Roller Shape on
Creasing Characteristics of Double-wall Corrugated Board,
Proceeding Book of International Conference
on Materials Processing Technology, (June 27-28,
2013), Bangkok, [171-176], ISBN 978-974-456-743-7.
-
H. Kishi, A. Matudoe, K. Yamashita, S.
Nagasawa and Y. Fukuzawa,
Analysis of
AE Signals during Scratch Test on the Coated Paperboard,
Journal of Acoustic
Emission, Vol.
30, (2012), [1-10].
-
- S.Nagasawa,Y.Komiyama and P.Mitsomwang, Finite
Element Analysis of Corrugated Board on Rotary Creasing
Process, Journal of Advanced Mechanical Design, Systems, and
Manufacturing,
Vol.7 No.2 (2013, March
1) [103-114].
- S.Nagasawa and Y.Komiyama,
Effect
ofScoring
Condition on Creasing Characteristics of Double-Wall
Corrugated Board, Journal of Advanced Mechanical Design,
Systems, and Manufacturing, Vol.6
No.7 (2012, December 7) [1263-1272].
-
S.Nagasawa, Review: Research Introduction
on Form Cutting of Resin Sheet (Cutting Charactristics of
laminated Structure and Contact Stability for Wedging),
SOSEI-TO-KAKOU,
Vol.
53 No.622 (2012,
Nov.) [968-972].
-
- S.Nagasawa, Development
of microscope observation system for cutting deformation of
laminated-transparent resin sheet, NACHI Technical
Report, Vol.24, A1 (2012), Nachi-Fujikoshi Corp.,
[1-7].
-
-
-
-
-
-
Y.Ogata,
S.Nagasawa, Y.Fukuzawa, K.Yamashita and K.Sawatari, Generation
Behavior of Threadlike Paper Dust in Shearing of Heightwise
Corrugated Medium,
SOSEI-TO-KAKOU,
Vol.
52 No.610 (2011,
Nov.) [1213-1217].
-
S.Nagasawa,
K.Sato, M.Murayama, Y.Fukuzawa,
Effect of Tool Condition on Bending
Characteristics of Polyethylene Terephthalate Board
Subjected to Two-line Wedge Indentation,
Proceedings of International
Conference on Technology of Plasticity 2011 (
ICTP2011), Aachen,
Germany, [984-989], (2011, 9), ISBN: 978-3-514-00784-0.
-
-
-
S.Nagaswa, T.
Takamatsu, Y. Fukuzawa, and Y. Tozuka,
Creasing Characteristics of
A-Flute Corrugated Fiber Board Using a Rotary Creaser with
Respect to Breaking Strength, in:
AIP
Conference Proceedings, Vol. 1315 (Issue 1),
[1017-1022], (2011, 1), ISBN: 978-0-7354-0871-5
-
-
-
-
-
-
-
-
-
-
D.Abdul.HAMID,
S. NAGASAWA, Y. FUKUZAWA, Y.Komiyama, A.Hine:
AE Analysis on Blade
Cutting Pressure Adjustment in Dynamic Cutting of Paperboard,
Journal of Acoustic
Emission, Vol.
27
(2009.12), [64-76].
-
S.Chaijit,
Y. YAJIMA, K. KIKUCHI, S. NAGASAWA, Y. FUKUZAWA, and A.Hine :
Deformation Characteristics
on Surface Layer of White-Coated Paperboard by Center
Bevel Blade Subjected to Pushing Load,
Materials
Science Forum,
594
(2008-11), Trans Tech Publications, Switzerland
[39-44], ISBN 978-0-87849-360-9
-
-
-
-
- S. Nagasawa, T. Taga, Y. Fukuzawa, M. Murayama, and I.
Katayama, Effect of Cutting Line End of Paperboard on
Pushing-Load Characteristic of Center Bevel Blade, SOSEI-TO-KAKOU,
Vol.48 No.560, (2007.9), [829-833], DOI:
https://doi.org/10.9773/sosei.48.829
-
-
-
Chaijit,S., Nagasawa,S.,
Fukuzawa,Y., Murayama,M., Katayama,I. :
Effect of Tip Profile on
Cutting Processability of Trapezoidal Cutting Blade
Indented to Aluminum Sheet,
J.Mechanics of
Materials and Structures, Vol.
1, No.8, (2006), [1301-1321].
-
-
Nagasawa,S.,
Yamagata,D.,
Fukuzawa,Y., Murayama,M. :
Stress Analysis of wedged
rupture on surface layer of coated paperboard,
Journal of Materials Processing Technology,
178,No.1-3 (2006.9), [358-368].
-
-
S.Suzuki,
Y.Fukuzawa,S.Nagasawa,I.Katayama, H. Iijima:
Acoustic Emission
Characteristics on Variation of Cutting Tip Thickness during
Cutter Indentation on Paperboard,
SOSEI-TO-KAKOU,
Vol.
46 No.538
(2005.11), [1061-1065], DOI:
https://doi.org/10.9773/sosei.46.1061
-
S. Nagasawa,
Satoshi Hosoya,
Satoshi Nagae, Y. Fukuzawa, Isamu Katayama:
Profile Effect of Round-Edge
Cutter on Shear Characteristic of Paperboard Cutter
Indentation,
SOEI-TO-KAKOU,
Vol.
46 No.538
(2005.11), [1071-1075], DOI:
https://doi.org/10.9773/sosei.46.1071
-
Nagasawa S., Fukuzawa Y., Suzuki S., Katayama I. and
Sadamoto A., Acoustical
Estimation of Die Cutting Process, Proceedings of
2005 International Conference on Advanced Manufacture,
SME(society of manufacture engineering) Taipei Chapter,
[1085-1091], (Nov.28-Dec02, 2005), Taipei, ROC.
-
S. NAGASAWA, S.Chaijit, M.Murayama,
Y. FUKUZAWA and Isamu KATAYAMA: Effect of Cutting Tip Thickness and Friction
Coefficient on Load Characteristic of Trapezoidal Edge
Indentation to Aluminum Sheet, in: CD-ROM of MP2005
(2nd JSME/ASME Int. Conf. on Materials and Processing), (June
19-22, 2005), Seattle, USA.
-
S. Nagasawa,
H.Sekikawa,
M.Murayama, Satoshi Hosoya, Y. Fukuzawa, Isamu Katayama:
Buckling Analysis of Center
Bevel Cutter During Pushing Shear on Paperboard Die Cutting
,
SOSEI-TO-KAKOU,
Vol.
46 No.533
(2005.6), [515-519].
-
S.Suzuki,
M.Murayama, S.
Nagasawa, Y. Fukuzawa, I.Katayama:
Estimation of Mechanical Properties of
White-Coated Paperboard by Scratch Test and Push Shear Test
,
SOSEI-TO-KAKOU,
Vol.
46 No.530
(2005.3), [230-234].
-
Murayama,M.,
Nagasawa,S.,Fukuzawa,Y.and Katayama,I.:
Orthotropy Effect and
Strain Dependency of Paperboard on Load Characteristic of
Center Bevel Cutter Indented to Paperboard, Journal
of Materials Processing Technology, Vol.
159/Issue 2 , [199-205]
,
(30 January 2005).
-
S.Nagae, S.Nagasawa, Y.Fukuzawa,
A.Hine, I.Katayama:
Effects
of Quenching Hardness on Cutting Resistance and Crushing of
Blade Tip Indented on Paperboard ,
SOSEI-TO-KAKOU,
Vol.
45 No.524
(2004.9), [738-742], DOI: https://doi.org/10.9773/sosei.45.738
-
S.Nagasawa,
H.Sekikawa, M.Murayama,
Y. Fukuzawa, I.Katayama:
Effect
of Initial Tip Profile on Crushing of Center Bevelled Cutter
(Numerical Analysis of Crushing of Cutter Tip Indented on
Paperboard) ,
SOSEI-TO-KAKOU,
Vol.45 No.524 (2004.9), [743-747], DOI:
https://dox.org/10.9773/sosei.45.743
-
- S.Nagasawa, A.Sudo, Y.Fukuzawa, I.Katayama and
Y.Fukushima: Effect of Tip Shape of
Creasing Rule on Creasing Deformation Characteristics of
Paperboard, SOSEI-TO-KAKOU, Vol.45
No.518 (2004, March), [178-182].
- M.Murayama, S.Nagasawa, Y.Fukuzawa, I.Katayama: Effect of sheet thickness and friction
on load characteristic of crushed center bevel cutter indented
to aluminum sheet, Computational Methods in
Contact Mechanics VI, [115-124], WIT Press,
(2003.3), ISBN 1-85312-963-1.
- M.Murayama, S.Nagasawa, Y.Fukuzawa and I.Katayama: Effect of Tip Thickness of Center Bevel Cutter
on Load Characteristic of Cutter Indentation to Aluminum Sheet,
SOSEI-TO-KAKOU, Vol.44 No.507 (2003.4),
[437-441].
- S.Nagasawa, Y.Fukuzawa, T.Yamaguchi, S.Tsukatani, I.Katayama:
Effect of crease depth and crease deviation on folding
deformation characteristics of coated paperboard, Journal
of Materials Processing Technology,
Vol.140 Issues 1-3, (2003.9), [157-162].
- S.Nagasawa, Y.Fukuzawa, T.Yamaguchi, M.Murayama,
D.Yamaguchi and I.Katayama: Effects
of Blade Tip Shape on Thread Dross Occurrence in
Paperboard Die Cutting, SOSEI-TO-KAKOU,
Vol.43 No.498 (2002.7), [624-628].
- A.Sadamoto, T.Yamaguchi, S.Nagasawa, Y.Fukuzawa, D.Yamaguchi
and I. Katayama.: Analysis of sound
radiated by paperboard die cutting, Audio
Engineering Society Proceedings of 21st International
Conference, [136-139] (2002.6), ISBN
0-937803-47-2.
- A.Sadamoto, T.Yamaguchi, S.Nagasawa, Y.Fukuzawa, D.Yamaguchi
and I. Katayama: Sensing for Machining
using Pressure Level of Sound
Radiated by Paperboard Die
Cutting, Journal of the Japan Society for
Precision Engineering, Vol.68 No.12 (2002.12),
[1554-1558].
- Shigekazu Suzuki, Yasushi Fukuzawa, Shigeru Nagasawa,
Hideaki Sakayori, Isamu Katayama:
Characterization of Paperboard Deformation by AE, Progress
in Acoustic Emission XI, the Japan Society for
Non-Destructive Inspection, [37-44]. (2002.11), ISBN
4-931018-04-1.
- Shigeru Nagasawa, Hitoshi Sato, Daishiro Yamaguchi.,
Yasushi Fukuzawa, Isamu Katayama and Akinori Yoshizawa: Effects of Tip Clearance and Blade Hardness on
Cutting Resistance and Tip Shape in Paperboard Die
Cutting, SOSEI-TO-KAKOU, Vol.42
No.480 (2001,Jan), [38-42].
- Shigeru Nagasawa, Yasushi Fukuzawa, Daishiro Yamaguchi.,
Satoshi Nagae, Isamu Katayama and Akinori Yoshizawa:
Deformation Characteristics on Creasing of
Paperboard under Shallow Indentation, Advances in Fracture
Research: Proceedings of the 10th
International Congress of Fracture (ICF10),
PID: 0202-1-5, Honolulu (2001.Dec), Elsevier Science. ISBN
0080440428.
- Shigeru Nagasawa, Yasushi Fukuzawa, Akira Hine., Isamu
Katayama, Akinori Yoshizawa and Takeo Furumi: Effects of Edge Clearance and Board Thickness
on Shearing Characteristic of Paperboard Die Cutting,
SOSEI-TO-KAKOU, Vol.41 No.469 (2000,Feb),
[126-130].
Mechanical Characterization of Lightweight Ceramics Abrator(LCA)
- Shigeru Nagasawa, Kelly. E. Parmenter, Karl Shuman, and
Frederic Milstein, Experimental
Failure Modes and FEA of Lightweight Ceramic Ablators under
Iosipescu Testing, Advances in Fracture Research:
Proceedings of the 10th International Congress of Fracture
(ICF10), ICF100576OR PID: 0576-1-6, Honolulu
(2001.Dec), Elsevier Science. ISBN 0080440428.
-
Shigeru Nagasawa, Kelly E. Parmenter, Karl
Shuman, Frederic Milstein as NASA Ames Support Team for Mars
Exploration Rover Entry Descent and Landing: NASA Group
Achievement Award, the fifteenth of May, 2003.